Home Publish Ad Contact Login Register Publish Ad

13.8V 20A ~ 30A Power Supply *NEW*

NZ$ 156.00
Published date: December 25, 2019
Modified date: August 19, 2024
  • Location: Mellons Bay, Auckland East, New Zealand
13.8V 20A ~ 30A Power Supply *NEW*
13.8V 20A ~ 30A Power Supply *NEW* 13.8V 20A ~ 30A Power Supply *NEW*

The QJE PS30SWIV is well known in the amateur world as a great little unit for powering rigs. Consertively capable of 20A continuous (30A peak), this little monster is ideal for those 100W rigs. Voltage output is variable between 9 and 15 and there is a fixed (switch position) 13.8V setting. High current output is available on binding posts on the rear panel and there is an auxiliary output on the front ~ 5A.

At around 15 x 7.5 x 23 cm and weighing in at around 1.5kg, this isn't going to take up heaps of valuable space. It's a switch-mode I hear you say! Well, in the unlikely event that you do receive a birdie on your receive frequency, you can tune the birdie away with the handy front panel "noise offset" control. In reality, if you have a good antenna (not a bit of hookup wire poked into the rig antenna socket) and a good ground connection on your rig, you are unlikely to get birdies from this unit.

Freight - at cost (NZ Post Courier)

Product Condition: New

Contact seller Share

Related listings

  • Tait Power Supply
    Tait Power Supply
    NZ$ 5.00
    Power Supplies Auckland (Auckland East) April 20, 2025
    Old Tait Power Supply.  Not tested. Pick up from Musick Point Radio Station. Sold by Musick Point Radio Group
  • Collins 516F-2 with matching cabinet
    Collins 516F-2 with matching cabinet
    NZ$ 395.00
    Power Supplies Auckland (Auckland Central) September 13, 2024
    I did the typical upgrades in 2010: V1 socket ugraded to ceramic, all caps replaced, and the obsolete selenium recitifier replaced with a silicon diode. A speaker was installed in the cabinet by a previous owner and it works well. I have used this su...