Anderson Powerpole Connectors
- Location: Auckland East, Auckland East, New Zealand
Genuine Anderson Powerpole connectors in sets of 1 Red, 1 Black housing and 2 contacts
Available here are the "PP15/45" size housings with a choice of 3 contact sizes. The housings are rated to 55A, 600V (note the contacts are not finger protected!!!). This size connector is commonly used for 12v supplies to ham rigs where easy disconnect is required. The connector is genderless and will mate with the same version connector where one connector is presented upside down to the other.
| Contact Size | Price per Set ( 1 Red + 1 Black Housing and 2 contacts ) |
| 15A 16 - 20 AWG (0.52 to 1.3mm²) closed barrel, silver plate finish * | $4.60 |
| 30A 12 - 16 AWG (1.3 to 3.3mm²) closed barrel, silver plate finish * | $4.60 |
| 45A 10 - 14 SWG (2.1 to 5.3 mm²) open crimp, silver plate finish | $5.40 |
* The closed barrel crimp contacts may be soldered instead of crimping.
Individual components also available:
Red or Black housing: $1.60 / housing
Blue, Green, White, Yellow or Orange housing : $1.95 / housing
Black & Red Housing pair - ultrasonically welded together: $4.20 ea
"15A" or "30A" contacts: $0.80 ea
"45A" contacts: $1.20 ea
Freight $5.50 Post tracked satchel to Urban / PO Box addresses. $9.50 to RD
Related listings
-
SMA to SMA / RP-SMA AdaptorsNZ$ 2.90Connectors (Auckland East) October 22, 2021SMA / RP-SMA Adaptors Adaptors available in various combinations of SMA and reverse polarity SMA (RP-SMA), as listed below. For RP-SMA devices, the centre contact is the opposite of that found on a standard SMA connector. RP-SMA connections are typi... -
Powerpole Type SB50 (50A) ConnectorNZ$ 5.75Connectors (Auckland East) April 29, 2021SB50 compatible Powerpole type (not genuine Anderson brand) 50amp / 600V DC housing and two 6g silver plated crimp lugs. Grey coloured. Ideal for battery disconnects for portable / field day setups! Powerpole connectors are genderless and two con... -
SO-239 to 3/8" Thread Mount for Vertical AntennaNZ$ 14.80Connectors (Auckland East) December 12, 2020Antenna Adaptor for Antennas with 3/8" Thread Mounting A heavy duty mount with SO239 to accept 3/8" x 24 tpi external thread based antennas . Has stepped isolating washer to fit 13mm hole in mounting bracket. Fixing nut will accept min 12mm thread f...


