1 - 12 of 53 listings

Listings

  • 8 characters X 2 lines GPS LCD clock
    8 characters X 2 lines GPS LCD clock
    NZ$ 30.00
    Accessories dunedin (Other - South Island) March 2, 2021
    GPS synchonised clock, always accurate Displays hours, minutes & seconds and UTC hours. CPU is a Picaxe 08M2 & 18M2 driver for 2 line OLED display Designed & hand-made in Dunedin by Bob ZL4CE width 90mm, height 50mm, depth 35mm Uses suppl...
  • 6 led GPS clock
    6 led GPS clock
    NZ$ 30.00
    Accessories dunedin (Other - South Island) March 2, 2021
    The smallest I can make! GPS synchonised clock, always accurate Displays hours and minutes and seconds. Switch on the side switches between NZ standard time and daylight saving time. CPU is a Picaxe 08M2 & MAX7219 driver for 6 x 7 segment LEDS. H...
  • 80mtr qrp transceiver
    80mtr qrp transceiver
    NZ$ 35.00
    Transmitters / Receivers dunedin (Other - South Island) March 2, 2021
    An 80 metre CW QRP 1.5 watt transmitter / receiver based on the Radi0kit 180. It uses a 3.579 mhz crystal.. Box is cast-aluminium, size is 90mm width, 40mm height and 140mm depth including antenna socket and switches. Sound output uses a min jack con...
  • 2 way ant switch & 30watt dummy load
    2 way ant switch & 30watt dummy load
    NZ$ 40.00
    Antenna Components dunedin (Other - South Island) March 2, 2021
    A 2 way antenna switch plus a 50 ohm 30 watt dummy load. The switch is a 3 way high voltage heavy duty plastic rotary. The dummy load resistor is mounted on a heat sink inside the case. Input and output connectors are PL259. w102mm, h55mm, l180mm A 4...
  • 40mtr VFO varicap module
    40mtr VFO varicap module
    NZ$ 35.00
    Accessories dunedin (Other - South Island) March 2, 2021
    Very stable J310 Jfet varicap, potentiometer tuned VFO. Around 1 volt RF available into 50 ohms. Ideal for use on direct conversion receivers or QRP transmitters. Supplied with mounting hard ware and knob. Runs off 12-15 volts. Also available for 5mh...
  • 1 valve CW transmitter PCB
    1 valve CW transmitter PCB
    NZ$ 30.00
    Transmitters / Receivers dunedin (Other - South Island) March 2, 2021
    PCB with components for a single valve 3.579mhz Xtal controlled CW transmitter. Original design by the late Ron ZL1TW as described by the late Gary ZL1AN on his website https://www.qsl.net/zl1an/ with a correction. I've had up to 60 watts out of it u...
  • CW Zero Beat
    CW Zero Beat
    NZ$ 30.00
    Accessories dunedin (Other - South Island) March 2, 2021
    Based on Chuck WB9KZY's grandson of Zerobeat. Allows you to monitor the received cw and easily adjust your transceiver frequency to within +/- 10 hz of another station.. It has an array of 10 LEDs that when lit, either singly or in pairs, indicate ho...
  • PK4 CW Keyer
    PK4 CW Keyer
    NZ$ 45.00
    Accessories dunedin (Other - South Island) February 9, 2021
    This is a CW electronic keyer using Chuck WB(KZY's PK 4 keyer chip built by Bob ZL4CE, and includes the switches etc for a fully functional keyer. Morse key not supplied. Output to the transmitter uses a dil reed relay with isolated mono jack. Contac...
  • Break-In Magazines - Free
    Break-In Magazines - Free
    Check with seller
    Books - Magazines (Auckland West) January 14, 2021
    Stack of break ins Free to go To many to list Pickup Te Atatu North
  • SO-239 to 3/8" Thread Mount for Vertical Antenna
    SO-239 to 3/8" Thread Mount for Vertical Antenna
    NZ$ 12.65
    Antenna Components (Auckland East) December 12, 2020
    Antenna Adaptor for Antennas with 3/8" Thread Mounting A heavy duty mount with SO239  to accept 3/8" x 24 tpi male thread based antennas . Has stepped isolating washer to fit 13mm hole in mounting bracket. Fixing nut will accept min 12mm thread from ...
  • log per yagi
    log per yagi
    NZ$ 50.00
    Antennas (Auckland West) November 24, 2020
    50 - 1.2 ghz im sure has fibre glass pole about 1.5 mtrs long will post pic soon
  • Anderson PowerPole Connectors
    Anderson PowerPole Connectors
    Check with seller
    Passive (Auckland East) October 5, 2020
    Genuine Anderson Power Pole connectors in sets of 1 Red, 1 Black housing and 2 contacts Available here are the "PP15/45" size housings with a choice of 3 contact sizes. The housings are rated to 55A, 600V (note the contacts are not finger protected!!...